Skip to Content

Changes for page Getting Started

Last modified by superadmin on 2021/09/09 20:56
From version 8.3
edited by superadmin
on 2021/09/09 18:12
Change comment: Renamed from xwiki:ISYMDOCS.Getting Started
To version 9.1
edited by superadmin
on 2021/09/09 18:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -32,7 +32,7 @@
32 32  Once the iSymphony server is enabled, run an **Apply Config** in FreePBX to configure the iSymphony server.
33 33  {{/info}}
34 34  
35 -Before you start, make sure that you review the [[doc:iSymphony Requirements]] and [[doc:Supported Platforms]] sections in order to ensure that your system supports iSymphony.
35 +Before you start, make sure that you review the [[doc:ISYMDOCS.iSymphony Requirements]] and [[doc:ISYMDOCS.Supported Platforms]] sections in order to ensure that your system supports iSymphony.
36 36  
37 37  = 2. Installing iSymphony =
38 38  
... ... @@ -50,8 +50,8 @@
50 50  You can only use the [[doc:FreePBX, Elastix and PBX in a Flash Installation]] instructions if using a system that is based on **FreePBX 2.10+** due to the FreePBX version support of the iSymphony FreePBX module. If you are using a system based on a version of FreePBX below 2.10 you will have to use the **Vanilla Asterisk Install** instructions.
51 51  {{/info}}
52 52  
53 -1. Follow the [[doc:FreePBX, Elastix and PBX in a Flash Installation]] instructions.
54 -1. Familiarize yourself with the iSymphony [[doc:FreePBX Module Administration]] sections.
53 +1. Follow the [[doc:ISYMDOCS.FreePBX, Elastix and PBX in a Flash Installation]] instructions.
54 +1. Familiarize yourself with the iSymphony [[doc:ISYMDOCS.FreePBX Module Administration]] sections.
55 55  
56 56  Once these steps are complete you will have a fully functioning and configured install of iSymphony.
57 57  
... ... @@ -59,28 +59,28 @@
59 59  
60 60  For installations that do not utilize a FreePBX based configuration GUI.
61 61  
62 -1. Follow the [[doc:Asterisk Server (Vanilla) Installation]] instructions in order to get an iSymphony server installed and running.
63 -1. Log into the Administrator Interface. See [[doc:Connecting to the Administration Interface]].
64 -1. Change the default Administrator login credentials. See [[doc:Administrators]].
65 -1. Create a PBX Connection to your phone system. See [[doc:PBX Connections]].
66 -1. Configure your Extensions in iSymphony. See [[doc:Extensions]].
67 -1. Create iSymphony Users. See [[doc:Users]].
68 -1. Configure Queues. See [[doc:Queues]]. (optional)
69 -1. Configure Conference Rooms. See [[doc:Conference Rooms]]. (optional)
70 -1. Configure Parking Lots. See [[doc:Parking Lots]]. (optional)
71 -1. Configure Statuses. See [[doc:Statuses]]. (optional)
62 +1. Follow the [[doc:ISYMDOCS.Asterisk Server (Vanilla) Installation]] instructions in order to get an iSymphony server installed and running.
63 +1. Log into the Administrator Interface. See [[doc:ISYMDOCS.Connecting to the Administration Interface]].
64 +1. Change the default Administrator login credentials. See [[doc:ISYMDOCS.Administrators]].
65 +1. Create a PBX Connection to your phone system. See [[doc:ISYMDOCS.PBX Connections]].
66 +1. Configure your Extensions in iSymphony. See [[doc:ISYMDOCS.Extensions]].
67 +1. Create iSymphony Users. See [[doc:ISYMDOCS.Users]].
68 +1. Configure Queues. See [[doc:ISYMDOCS.Queues]]. (optional)
69 +1. Configure Conference Rooms. See [[doc:ISYMDOCS.Conference Rooms]]. (optional)
70 +1. Configure Parking Lots. See [[doc:ISYMDOCS.Parking Lots]]. (optional)
71 +1. Configure Statuses. See [[doc:ISYMDOCS.Statuses]]. (optional)
72 72  
73 73  = 3. Applying Your License =
74 74  
75 -If you have an iSymphony license apply it to your server. See [[doc:Licensing]].
75 +If you have an iSymphony license apply it to your server. See [[doc:ISYMDOCS.Licensing]].
76 76  
77 77  = 4. Setup The Voicemail And Recording Resource Host =
78 78  
79 -In order to playback voicemails and recordings directly in browser, you must set up the voicemail and recording resource hosts. See [[doc:Voicemail And Recording Playback Host Setup]].
79 +In order to playback voicemails and recordings directly in browser, you must set up the voicemail and recording resource hosts. See [[doc:ISYMDOCS.Voicemail And Recording Playback Host Setup]].
80 80  
81 81  = 5. Connect To The Client Interface =
82 82  
83 -Log into the client interface. See [[Connecting to the Client Interface>>doc:Connecting To The Client Interface]].
83 +Log into the client interface. See [[Connecting to the Client Interface>>doc:ISYMDOCS.Connecting To The Client Interface]].
84 84  
85 85  = 6. Familiarize Yourself With The Functionality Of The Client Interface =
86 86