Skip to Content

Wiki source code of Getting Started

Version 5.1 by michaely on 2021/09/09 18:01
Show last authors
1 **//On this page~://**
2
3
4
5 {{toc/}}
6
7 This document is indented for users who are new to iSymphony 3.0 and want to get a basic installation of iSymphony up and running. This document can also be used as a general setup guide.
8
9 = 1. Before You Start =
10
11 {{info}}
12 **Important Information for FreePBX Distro Users**
13
14 If you are utilizing the FreePBX Distro from [[http:~~/~~/www.freepbx.org>>url:http://www.freepbx.org||shape="rect"]] you may already have iSymphony installed and ready to go. If your FreePBX Distro comes with iSympohny V3 pre-installed you can skip to **step 3** in this guide.
15
16
17
18 (% style="color: rgb(0,0,0);" %)To check if your FreePBX system already has iSymphony V3 pre-installed navigate to **Admin->iSymphony V3** in FreePBX and verify that the server **Connected** status is showing **YES**. If you do not have **Admin->iSymphony V3 **in the FreePBX menu review the iSymphony Requirements and Supported Platforms below and continue to **step 2** in this guide to install the iSymphony Server.
19 {{/info}}
20
21 Before you start, make sure that you review the [[doc:iSymphony Requirements]] and [[doc:Supported Platforms]] sections in order to ensure that your system supports iSymphony.
22
23 = 2. Installing iSymphony =
24
25 Dependent on your utilization of a FreePBX based (or FreePBX derived, such as Trixbox or PBX In a Flash) configuration GUI for Asterisk, your installation method may vary.
26
27 == FreePBX Based Install ==
28
29 For installs that utilize a FreePBX based configuration GUI.
30
31 {{info}}
32 You can only use the [[doc:FreePBX, Elastix and PBX in a Flash Installation]] instructions if using a system that is based on **FreePBX 2.10+** due to the FreePBX version support of the iSymphony FreePBX module. If you are using a system based on a version of FreePBX below 2.10 you will have to use the **Vanilla Asterisk Install** instructions.
33 {{/info}}
34
35 1. Follow the [[doc:FreePBX, Elastix and PBX in a Flash Installation]] instructions.
36 1. Familiarize yourself with the iSymphony [[doc:FreePBX Module Administration]] sections.
37
38 Once these steps are complete you will have a fully functioning and configured install of iSymphony.
39
40 == Vanilla Asterisk Install ==
41
42 For installations that do not utilize a FreePBX based configuration GUI.
43
44 1. Follow the [[doc:Asterisk Server (Vanilla) Installation]] instructions in order to get an iSymphony server installed and running.
45 1. Log into the Administrator Interface. See [[doc:Connecting to the Administration Interface]].
46 1. Change the default Administrator login credentials. See [[doc:Administrators]].
47 1. Create a PBX Connection to your phone system. See [[doc:PBX Connections]].
48 1. Configure your Extensions in iSymphony. See [[doc:Extensions]].
49 1. Create iSymphony Users. See [[doc:Users]].
50 1. Configure Queues. See [[doc:Queues]]. (optional)
51 1. Configure Conference Rooms. See [[doc:Conference Rooms]]. (optional)
52 1. Configure Parking Lots. See [[doc:Parking Lots]]. (optional)
53 1. Configure Statuses. See [[doc:Statuses]]. (optional)
54
55 = 3. Applying Your License =
56
57 If you have an iSymphony license apply it to your server. See [[doc:Licensing]].
58
59 = 4. Connect To The Client Interface =
60
61 Log into the client interface. See [[Connecting to the Client Interface>>doc:Connecting To The Client Interface]].
62
63 = 5. Familiarize Yourself With The Functionality Of The Client Interface =
64
65 See the [[iSymphyony Users Guide>>doc:iSymphony User's Guide]] for more information.
66
67 (((
68 (% style="color: rgb(0,0,0);white-space: pre-wrap;background-color: rgb(237,245,255);" %)
69
70 )))