Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -36,8 +36,86 @@
36	36
37	37	There are several methods of upgrading iSymphony. In general, we recommend using the automated update method, unless you have a specific reason to use the manual method, or the manual method failed. See the following pages for details on each method:
38	38
39		-* [[doc:Upgrading iSymphony with the Automatic Method]]
40		-* [[doc:Upgrading iSymphony with the Manual Method]]
	39	+* [[Upgrading iSymphony with the Automatic Method>>doc:Upgrading iSymphony with the Automatic Method]]
	40	+* [[Upgrading iSymphony with the Manual Method>>doc:Upgrading iSymphony with the Manual Method]]
	41	+
	42	+
	43	+
	44	+=== **Automated** ===
	45	+
	46	+1. Backup all files in** /opt/isymphony3/server/conf**
	47	+1. Log into the iSymphony Administration page. See [[doc:Connecting to the Administration Interface]] for more information.
	48	+1. Select **Global Configuration** in the top right hand corner of the administration window.
	49	+1. If an update is available for download you will see a button next to **System** under **Modules** that reads **Download Update <version>**.
	50	+1. Click on the **Download Update <version>** button to begin downloading the update.
	51	+1. Once the download and decompression is complete click the button again to install the update.
	52	+
	53	+Once this is done the server will shutdown and apply the update. The server will then automatically restart.
	54	+
	55	+=== **Manual** ===
	56	+
	57	+The manual upgrade instructions will differ depending on the type of install you have. See [[doc:Determine the Installation Method]] for more information on how to determine your installation type.
	58	+
	59	+{{info}}
	60	+If your installation method used the FreePBX RPM make sure you use the FreePBX RPM to upgrade. If not the upgrade will fail.
	61	+{{/info}}
	62	+
	63	+
	64	+
	65	+==== RPM ====
	66	+
	67	+1. (((
	68	+Use the following command to stop your iSymphony Server:
	69	+
	70	+{{code language="bash"}}
	71	+service iSymphonyServerV3 stop
	72	+{{/code}}
	73	+)))
	74	+1. Backup all files in** **/opt/isymphony3/server/conf**. **
	75	+1. (((
	76	+Once you have downloaded the new RPM to the server run the following command to apply the update.
	77	+
	78	+{{code language="bash"}}
	79	+rpm -Uvh iSymphonyServerV3-<version>-1.noarch.rpm
	80	+{{/code}}
	81	+)))
	82	+1. (((
	83	+Restart your iSymphony Server using the following command:
	84	+
	85	+{{code language="bash"}}
	86	+service iSymphonyServerV3 start
	87	+{{/code}}
	88	+)))
	89	+
	90	+==== Tarball ====
	91	+
	92	+1. (((
	93	+Shutdown the server.
	94	+
	95	+{{code language="bash"}}
	96	+/opt/isymphony3/server/shutdown.sh
	97	+{{/code}}
	98	+)))
	99	+1. Back up all files in /opt/isymphony3/server/conf.
	100	+1. (((
	101	+Once you have downloaded the iSymphony tarball to your server run the following commands to apply the update.
	102	+
	103	+{{code language="bash"}}
	104	+tar xzf iSymphonyServerV3<version>.tar.gz
	105	+cd ./iSymphonyServerV3<version>
	106	+chmod +x install.sh
	107	+./install.sh
	108	+{{/code}}
	109	+
	110	+The install script will detect the installed instance of iSymphony and apply the upgrades.
	111	+)))
	112	+1. (((
	113	+Restart the server
	114	+
	115	+{{code language="bash"}}
	116	+/opt/isymphony3/server/startup.sh
	117	+{{/code}}
	118	+)))
41	41	{{/layout-cell}}
42	42	{{/layout-section}}
43	43	{{/layout}}